1 d a t a s h e e t : c l d - c t 1 1 9 1 . 0 0 0 features ? size (mm): 6.0 x 5.0 ? dominant wavelength (nm): ? red (610-625) ? green (514-534) ? blue (460-480) ? luminous intensity (mcd) ? red (710-1800) ? green (710-1800) ? blue (280-710) ? lead-free ? viewing angle: 120 degrees ? rohs-compliant applications ? full-color video screen ? decorative lighting ? amusement cree ? plcc6 3-in-1 smd led clp6s-fkw data sheet cree plcc full-color leds offer high-intensity light output and a wide viewing angle in an industry-standard package. designed to work in a wide array of environmental conditions, cree plcc full-color leds are suited for indoor video screen, decorative lighting and amusement applications. subject to change without notice. www.cree.com/ledlamps
2 cld-ct1191.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit r g b forward current note 1 i f 80 80 80 ma peak forward current note 2 i fp 200 100 100 ma reverse voltage v r 5 5 5 v power dissipation p d 200 400 400 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 110 110 c junction/ambient 1 chip on r thja 250 210 210 c/w junction/ambient 3 chips on r thja 500 300 300 c/w junction/solder point 1 chip on r thjs 150 130 130 c/w junction/solder point 3 chips on r thjs 150 160 160 c/w electrostatic discharge classifcation(mil-std-883e) esd 1000 v notes: 1. single-color light. 2. pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics condition symbol values unit r g b wavelength at peak emission i f = 50 ma peak 620 521 468 nm dominant wavelength i f = 50 ma dom 610~625 514~534 460~480 nm spectral bandwidth at 50% i rel max i f = 50 ma 24 38 28 nm viewing angle at 50% i v i f = 50 ma 2? 120 120 120 deg forward voltage i f = 50 ma v f(avg) 2.0 4.0 4.0 v v f(max) 2.5 5.0 5.0 v luminous intensity i f = 50 ma i v(min) 710 710 280 mcd i v(avg) 1000 900 390 mcd reverse current (max) v r = 5 v i r 10 10 10 a
3 cld-ct1191.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. intensity bin limit (i f = 50 ma) color bin limit (i f = 50 ma) tolerance of measurement of luminous intensity is 10%. tolerance of measurement of dominant wavelength is 1 nm. red bin code min. (nm) max. (nm) pd 610 625 green bin code min. (nm) max. (nm) ga 514 534 red bin code min. (mcd) max. (mcd) m 710 900 n 900 1120 p 1120 1400 q 1400 1800 green bin code min. (mcd) max. (mcd) m 710 900 n 900 1120 p 1120 1400 q 1400 1800 blue bin code min. (mcd) max. (mcd) g 280 355 h 355 450 j 450 560 k 560 710 blue bin code min. (nm) max. (nm) ba 460 480
4 cld-ct1191.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. order code table* kit number color luminous intensity (mcd) dominant wavelength (nm) package min. max. color bin min. (nm) color bin max. (nm) CLP6S-FKW-CMQMQGKDDAAAA3 red 710 1800 pd 610 pd 625 reel green 710 1800 ga 514 ga 534 reel blue 280 710 ba 460 ba 480 reel notes: ? the above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. only one intensity-bin code and one color-bin code will be shipped on each reel. single intensity-bin code and single color-bin code will be orderable in certain quantities.for example, any 1 intensity bin from k - n means only 1 intensity-bin (k or m or n) will be shipped by cree. for example, any 1 color-bin from g7 - ga means only 1 color- bin (g7 or g8 or g9 or ga) will be shipped by cree. ? please refer to the cree led lamp reliability test standards document for reliability test conditions. ? please refer to the cree led lamp soldering & handling document for information about how to use this led product safely.
5 cld-ct1191.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps ? copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. graphs 7k dergdwddufroofwgiurpvwdwlvwlfdouvwkdwgrrwfvvdulofruuvsrgwrwkdfwdo parameters of each single led. hence, these data will be changed without further notice.
6 cld-ct1191.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps ? copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. graphs 7k dergdwddufroofwgiurpvwdwlvwlfdouvwkdwgrrwfvvdulofruuvsrgwrwkdfwdo parameters of each single led. hence, these data will be changed without further notice.
7 cld-ct1191.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. mechanical dimensions all dimensions are in mm. ?
8 cld-ct1191.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed by ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner:
9 cld-ct1191.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps package ? the boxes are not water-resistant, and they must be kept away from water and moisture. ? the leds are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. ? cardboard boxes will be used to protect the leds from mechanical shocks during transportation. ? the reel pack is applied in smd led. ? max 900 pcs per reel. ??? ??? ??? ??? ????????? ?????????? ????????? ? ? copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc.
|
